The easiest most cost effective way to add automatic reversing to one section of your DCC layout.

Gray Replacement Terminal Plug for lost or damaged plugs on Digitrax Command Stations and Boosters This item is a replacement part that can be ordered through your dealer.  Digitrax does not repair this item or sell it directly to end users. Warranty coverage for...

  Nickel-Metal Hydride 600mAH 3.6v Rechargeable Battery Pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery cover. No battery “memory” effect. Works with DT602 Family of throttles.  

3 Pack Edge Connector for use with PM4 Series Boards, BDL16 Series Boards and SE8 Series Boards This is a replacement part that can be ordered through your dealer.  Digitrax does not repair this item or sell directly to end users. Specifications For Use...

Dual 3/5/8 Amp AutoReversing DCC Booster Up to 16 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch setup Auto resetting over temperature and short circuit...

Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price. It offers simplified advanced train operation for any size layout and is fully expandable. You won’t have to start over when you want to do more with your railroad. Zephyr Express...

Decoder Wire for decoder, lighting & signal installation 90ft 32AWG stranded wire-10 ft lengths in 9 colors

Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .404” x .2”13.9mm x 10.3mm x 5 mm N/HO Scale 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp FX3 Function outputs for prototypical lighting effects and on/off control:Constant Brightness...

Fits Many DCC-Ready N and HO Scale Locomotives Size: 1.158” x .386” x .115”29.43mm x 9.81mm x 2.98mm N Scale 1.0 Amp/1.5 Amps Peak FX3 Function outputs for prototypical lighting effects and on/off control:Constant Brightness Lighting with directional or independent control.Optimized selectable LED or incandescent lamp...

Features: Designed to fit the Kato N scale P-42, PA-1 & E-8 Golden-White LEDs for added realism Decoder Lock equipped Specifications Current Rating-Motor 1 Amp Continuous/1.25 Amp Peak Rating Size 0.5485” x 2.2165 w/o LEDs x .1015” (13.9319mm x 56.2991mm w/o LEDs x 2.5781mm)...

Features: Designed to fit the Kato N scale SD40-2locos made from year 2006 onward Specifications Current Rating-Motor 1 Amp Continuous/1.25 Amp Peak Rating Size 0.426” x 3.11” w/LEDs x 0.195” (10.8204mm x 78.994mm w/LEDs x 4.953mm)

Digitrax DS74 Quad Switch Stationary Decoder Quad switch decoder for Solenoid or Slow-motion turnouts. Configurable for Capacitive Discharge with balky solenoids. Configurable for on/off control of 8 layout lights. Plug and play wire connectorization. Works with compatible LocoNet Systems. Stabilized and adjustable output voltages....

The DT602 Advanced super throttle gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand. Available in standard tethered or Radio Duplex.   The DT602 is designed to handle nearly every aspect of layout...

The DT602D is our top-of-the-line, Duplex Radio Super Throttle.  The DT602D Advanced Super Throttle gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand. The DT602D is designed to handle nearly every aspect...

Digitrax LocoMotion® SystemYour locomotives look like the real thing. The Digitrax LocoMotion® System makes them run like the real thing, too! Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration. Normal...

Fits Many Z, N and HO Scale Locomotives Size: .455” x .369” x .126”11.56mm x 9.37mm x 3.2mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp FX3 Function outputs for prototypical lighting effects and on/off control:Constant Brightness Lighting with directional or independent control.Optimized...

Fits Many Z, N and HO Scale Locomotives Size: .455” x .369” x .126”11.56mm x 9.37mm x 3.2mm Z, N and HO Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp DCC Medium Plug with 1 ‘ Harness FX3 Function outputs for prototypical lighting effects...

It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2 watt protection resistor. LT1 Features: Use as a diagnostic tester Test decoders prior to installation Test Track power...

2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax Easy Connect 8 Pin Harness Motor 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 8 Ohm 10...

Features: Designed to fit the Kato N scale SD40-2locos made from year 2006 onward Specifications Current Rating-Motor 1 Amp Continuous/1.25 Amp Peak Rating Size 0.426” x 3.11” w/LEDs x 0.195” (10.8204mm x 78.994mm w/LEDs x 4.953mm)

Digitrax Digitrax SE74 Signal Decoder Fully connectorized installation. Optional support for DCC 9-Aspect control mode, including Lunars. Easy setup with Option Switches and LocoNet programming. Configurable for four solenoid or four slow-motion turnout control. 8 Input lines for local control and sensors. 8 System...

HO scale Mainline Signaling Kit including: 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic HO scale signal. Mounting board and hardware...

  Plug and Play Universal fascia panel supporting LocoNet. Two RJ12 front panel Throttle jacks. Three RJ12 rear pass-through LocoNet jacks Supports throttle charging. Fully connectorized installation. 2mm rear plug for e.g. PS14 DC power supply. 4-pin rear plug option to share DC power....

Works with compatible LocoNet Systems Compact size for easy one-handed operation Color 1.5” LCD Display Screen Full numeric keys for easy locomotive selection Fine speed control with encoder knob Forward/Reverse toggle switch with braking On/Off Switch, uses AA or BP600MH batteries 2 or 4...

Works with compatible LocoNet Systems Compact size for easy one-handed operation Color 1.5” LCD Display Screen Full numeric keys for easy locomotive selection Fine speed control with encoder knob Forward/Reverse toggle switch with braking On/Off Switch, uses AA or BP600MH batteries 2 or 4...

The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page. Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and Apps. Compatible...

STOWAWAY 1 PACK Throttle Holder   Bracket will hold: DT602, UT6 and other legacy Digitrax throttles. Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install.  

UR93 Features: Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support). More than double the radio range of UR92 Duplex units. Improved multi-path performance for cluttered layouts. Plug and Play setup, PS14 Universal power supply included. Compatible to be mixed with UR92...