Can be used to power multiple feeder tracks or operate multiple turnouts with a single turnout control switch.  

Universal Rail Joiners -- Nickel-Silver (for Code 100 or Code 83 Rail) pkg(48)

The Atlas Twin is a panel with double-pole, double-throw (DPDT) reversing switches wired in parallel. Useful for reversing sections and turntable control on single-cab layouts, plus many other applications. The Twin has threaded screw hole terminals to accept 3-48 screws and Spade Tongue Solderless...

Atlas Track Nails are the go-to track nails for N and HO Scale track. The Number 19 nails are blackened and made of sturdy steel for a minimum of bending when used. They have a round head and measure 1/2" long. Each package contains...

The Atlas N Scale Remote Control Switch Machine makes it easy to convert Atlas Code 80 Standard Line manual No. 4, No. 6 or wye turnouts to electric remote control. It is a twin-coil solenoid in a black housing that attaches to the side...

The Atlas N Scale Remote Control Switch Machine makes it easy to convert Atlas Code 80 Standard Line manual No. 4, No. 6 or wye turnouts to electric remote control. It is a twin-coil solenoid in a black housing that attaches to the side...

Bumper -- Fits Code 83 Track (Sold Separately) pkg(4)

Code 100 insulating rail joiners are small clips used to join two sections of track mechanically and are used to isolate the two sections of track electrically. 24 per pkg.

Code 100 insulating rail joiners are small clips used to join two sections of track mechanically and are used to isolate the two sections of track electrically. 24 per pkg.

Code 83 insulating rail joiners are small clips used to join two sections of track mechanically and are used to isolate the two sections of track electrically. 24 per pkg.

Atlas HO Scale Code 83 Terminal Rail Joiners provide a quick and easy way to hook up your power pack to Code 83 track. Simply use them in place of regular joiners and hook up the attached wires to your speed controller or other...

The Atlas Switch Control Box is a single-pole, double-throw momentary action electrical switch for control of Atlas or other twin-coil turnout switch machines in any scale. The Switch Control Box has threaded screw hole terminals to accept 3-48 screws and Spade Tongue Solderless Connectors,...

Atlas Code 83 Switch Machines are made to convert manual Code 83 Snap Switch turnouts to remote control. These solenoid turnout motors are available for mounting to several Atlas turnouts as well as under-table versions. Control Box 150-56 (sold separately) allows use of standard...

Atlas Code 83 Switch Machines are made to convert manual Code 83 Snap Switch turnouts to remote control. These solenoid turnout motors are available for mounting to several Atlas turnouts as well as under-table versions. Control Box 150-56 (sold separately) allows use of standard...

Manual Switch Machine for Code 83 Turnouts -- Left Hand

Manual Switch Machine for Code 83 Turnouts -- Right Hand

Nicely hides beneath your layout so you can throw your switches without being seen. Can be used with all Atlas (and many other) HO and N scale code 80 switches.

NEW! Deluxe Under Table Switch Machine includes a double-pole, double-throw relay with actuating mechanism. Can be used with most Atlas (any many other) HO/N scale switches. (Black)

Code 100Nickel Silver22 Gauge Wire

For All N Scale TrackRail joiners are small clips used to join two sections of track mechanically. The come in metal (nickel silver) which also connects the rails electrically, and plastic which are insulated to isolate two sections of track mechanically."

(Insulating)Rail joiners are small clips used to join two sections of track mechanically. The come in metal (nickel silver) which also connects the rails electrically, and plastic which are insulated to isolate two sections of track mechanically."

Nickel SilverTerminal joiners are rail joiners with wire attached to allow electricity to flow from the power pack to the rails.

Ballast Spreader -- For HO/On30

Ballast Spreader -- For N, HOn30 & OO-9

Ballast Spreader -- With Shutoff Feature

E-Z Track Plug-In Power Wire -- Red

Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the turnout. All 200 series units (Sprung)...

Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Has internal springs so it can be directly connected to the turnout throwbar. 

Sprung .165" Travel with SPDT Contacts & Fittings Complete ground throw includes set of five fittings for use with Roco, Micro Engineering, Peco, Atlas and most other commerical turnouts. Also includes parts to assemble one low current SPDT contact set.

Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

Mounting bracket and special linkage allow you to mount the Tortoise(tm) above or below the benchwork and up to 18" from the turnout. Suitable for all scales and brands of turnouts.

Tortoise Drilling Template

Set of two screw - type terminal blocks that can be soldered to the Smail circuit board to allow easy under-layout connections.

DT-4 Rolling Stock Detector

Whether for your first train set or for more advanced layouts Bachmann HO Scale E-Z Track makes setting up easy. Each section combines track and roadbed into a single piece, with snap-fit assembly and plug-in wiring to provide instant railroad fun. A hidden locking...

UniJoiner [20 pcs]

Insulated UniJoiner [20 pcs]

Terminal UniJoiner, 35" Leads 1 pair

Unitrack Extension Cord -- Length: 35-7/16" 90cm

Unitrack AC Extension Cord -- Length: 35-7/16" 90cm

Attaches to Kato Power Pack for plug-in connection of #381-24844 3-Color Signal Power Supply (sold separately)

Can be used to power multiple feeder tracks or operate multiple turnouts with a single turnout control switch. 24-833 replaces 24-827

Use to operate turnout electrically.

Unitrack Turnout Extension Cord

Connects to the AC 16/17V accessory output on your power pack. Only one converter is needed to connect as many turnout control switches and crossing gates as your layout requires.

Install roadbed under turnouts in seconds with these precut easy-to-use cork sections. Simply position and nail in place. One-piece design eliminates difficult alignment of diverging route and cutting. Beveled edges, height and color match other cork roadbed and sheets. Can be used with most...

Install roadbed under turnouts in seconds with these precut easy-to-use cork sections. Simply position and nail in place. One-piece design eliminates difficult alignment of diverging route and cutting. Beveled edges, height and color match other cork roadbed and sheets. Can be used with most...

Install roadbed under turnouts in seconds with these precut easy-to-use cork sections. Simply position and nail in place. One-piece design eliminates difficult alignment of diverging route and cutting. Beveled edges, height and color match other cork roadbed and sheets. Can be used with most...

Blackened Track Nails - Approximately pkg(300) - 0.7oz 20g -- Fits Code 83 & Code 100 Simplify your next HO Scale track project using WalthersTrack Blackened Track Nails featuring: Sized to fit molded starter holes on underside of all WalthersTrack Code 83 and Code...