Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets. Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables any length that...

Digitrax Digitrax SE74 Signal Decoder Fully connectorized installation. Optional support for DCC 9-Aspect control mode, including Lunars. Easy setup with Option Switches and LocoNet programming. Configurable for four solenoid or four slow-motion turnout control. 8 Input lines for local control and sensors. 8 System...

HO scale Mainline Signaling Kit including: 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic HO scale signal. Mounting board and hardware...

N scale Turnout Signaling Kit including:  1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a...

2 heads Common Anode Railroad Crossing Signal with 2 tracks sign

LED Block Signal 2 aspect silver mast (#160S2LS) - N Scale

LED Block Signal 3 aspect silver mast (#160S3LS) - N Scale

LED Dwarf Signal 2 aspect black (D160) - N Scale

N Scale - LED Railway Signals 3 over 3 G/Y/R G/Y/R (2 per pack) with resistors and wire

O Scale - 3 Aspect Signal (G/Y/R)

LED Railway Signals - N Scale - 3 over 3 G/Y/R G/Y/R (2 per pack) with resistors and wire

Description Features: 100% Brand new and high quality. When power on, the 2 lights will flash alternatively. Specification: Dimensions: Approx. 90mm(L) x 18mm(W) x 17mm(H). Voltage: 3V-12V,  DC Compatible. Material: Plastic. Package included: 1pc Power Distribution Board.

Description Features: 100% Brand new and high quality. When power on, the 2 lights will flash alternatively. Specification: Dimensions: Approx. 90mm(L) x 18mm(W) x 17mm(H). Voltage: 3V-12V,  DC Compatible. Material: Plastic. Package included: 2pcs Power Distribuiton Board.

Make HO Scale highways safer and more realistic with the Modern Cantilever Grade Crossing Signal from SceneMaster featuring: Long-lasting LEDs Adds animation and realism to model street scenes Modern American cantilever-style signals as used in many communities Correct scale dimensions Install in minutes in...

Protect motorists along your HO Scale railroad with the SceneMaster Grade Crossing Signal Controller. Designed to provide a realistic flashing rate with all SceneMaster Crossing Signals (each sold separately) the unit comes fully assembled and ready to use on DC-powered layouts*. Additonal features include:...