The easiest most cost effective way to add automatic reversing to one section of your DCC layout.

This Digitrax DH127 Series7 Mobile DCC Control Decoder is sized to fit many HO Scale locomotive models. Series7 decoders feature several available interfaces including the nine-pin harness socket, the NMRA eight-pin plug and others as noted in the product name. The decoder can handle...

Fits Kato, Athearn Genesis, Stewart, other HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

Fits many Kato HO legacy locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

Gray Replacement Terminal Plug for lost or damaged plugs on Digitrax Command Stations and Boosters This item is a replacement part that can be ordered through your dealer.  Digitrax does not repair this item or sell it directly to end users. Warranty coverage for...

  Nickel-Metal Hydride 600mAH 3.6v Rechargeable Battery Pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery cover. No battery “memory” effect. Works with DT602 Family of throttles.  

The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state information to LocoNet.  The BXPA1 is silent solid state and uses...

3 Pack Edge Connector for use with PM4 Series Boards, BDL16 Series Boards and SE8 Series Boards This is a replacement part that can be ordered through your dealer.  Digitrax does not repair this item or sell directly to end users. Specifications For Use...

Dual 3/5/8 Amp AutoReversing DCC Booster Up to 16 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch setup Auto resetting over temperature and short circuit...

Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price. It offers simplified advanced train operation for any size layout and is fully expandable. You won’t have to start over when you want to do more with your railroad. Zephyr Express...

Decoder Wire for decoder, lighting & signal installation 90ft 32AWG stranded wire-10 ft lengths in 9 colors

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and P-Harness Medium Plug with approximately.3.2" wires 1.0 Amp/2 Amps Peak 2 FX7 Functions, 200ma Output .

The DHWHPS harness is part of the Digitrax Easy Connect system--a DCCmedium plug on one end for connection to the locomotive’s DCC socket and aDigitrax 9-pin plug on the other end for connecting to the decoder’s 9-pinsocket.

Series 6 Features 2 FX3 Functions .418” x .621” x .107”10.63mm x 15.79mm x 2.72mm Fits MicroTrains Line SW1500 unit

Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .404” x .2”13.9mm x 10.3mm x 5 mm N/HO Scale 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp FX3 Function outputs for prototypical lighting effects and on/off control:Constant Brightness...

Fits Many N/HO Locomotives with 8 pin Medium Socket Size: .55” x .404” x .2”13.9mm x 10.3mm x 5 mm N/HO Scale Digitrax Easy Connect 8 Pin Harness 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp FX3 Function outputs for prototypical lighting effects and...

Fits Many DCC-Ready N and HO Scale Locomotives Size: 1.158” x .386” x .115”29.43mm x 9.81mm x 2.98mm N Scale 1.0 Amp/1.5 Amps Peak FX3 Function outputs for prototypical lighting effects and on/off control:Constant Brightness Lighting with directional or independent control.Optimized selectable LED or incandescent lamp...

Fits many older Atlas N locomotives Mobile Decoder Drop in “A0” Atlas light board replacement decoder 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K1” form-factor boards 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output Replaces both the DN163K1C & DN163K1D

Plug N'Play decoders are designed as drop-in replacements for the existing light board in the indicated locomotives. Decoders include golden-white LEDs that simulate the hue of real headlights. Installation is straightforward following the manufacturer's instructions. This 6 function decoder is rated at 1.5A (2A peak)...

Features: Designed to fit the Kato N scale P-42, PA-1 & E-8 Golden-White LEDs for added realism Decoder Lock equipped Specifications Current Rating-Motor 1 Amp Continuous/1.25 Amp Peak Rating Size 0.5485” x 2.2165 w/o LEDs x .1015” (13.9319mm x 56.2991mm w/o LEDs x 2.5781mm)...

Plug N'Play decoders are designed as drop-in replacements for the existing light board in the indicated locomotives. Decoders include golden-white LEDs that simulate the hue of real headlights. Installation is straightforward following the manufacturer's instructions. This 6 function decoder is rated at 1.5A (2A peak)...

Board Replacement Decoder for Kato N-Scale Glacier Express 1.5 Amp/2.0 Amps Peak Motor Current Rating 6 FX3 Functions-500mA Function Current Rating

Lets you share decoders among locomotives 2” wires from Digitrax plug to DCC 8 pin plug Fits many HO locomotives with 8 pin socket

DS44 Features: No frills stationary decoder. Simple installation and set up. Control 4 slow motion turnout machines from your DCC throttle. Quick set up for sequential addresses (like the DS54) Independent address set up also available (you can choose any stationary address for each...

Digitrax DS74 Quad Switch Stationary Decoder Quad switch decoder for Solenoid or Slow-motion turnouts. Configurable for Capacitive Discharge with balky solenoids. Configurable for on/off control of 8 layout lights. Plug and play wire connectorization. Works with compatible LocoNet Systems. Stabilized and adjustable output voltages....

Eight 9G servo decoder for 2-position Slow-motion turnouts. Configurable to control eight 3-position semaphores. Works with compatible LocoNet Systems. Plug and play connections. Option setup switches for configuration. On-layout remote programmability via LocoNet. 16 System Routes, with EZ-Route setup. Routes remotely editable using DT602...

The DT602 Advanced super throttle gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand. Available in standard tethered or Radio Duplex.   The DT602 is designed to handle nearly every aspect of layout...

The DT602D is our top-of-the-line, Duplex Radio Super Throttle.  The DT602D Advanced Super Throttle gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand. The DT602D is designed to handle nearly every aspect...

Digitrax LocoMotion® SystemYour locomotives look like the real thing. The Digitrax LocoMotion® System makes them run like the real thing, too! Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration. Normal...

Fits Many Z, N and HO Scale Locomotives Size: .455” x .369” x .126”11.56mm x 9.37mm x 3.2mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp FX3 Function outputs for prototypical lighting effects and on/off control:Constant Brightness Lighting with directional or independent control.Optimized...

Fits Many Z, N and HO Scale Locomotives Size: .455” x .369” x .126”11.56mm x 9.37mm x 3.2mm Z, N and HO Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp DCC Medium Plug with 1 ‘ Harness FX3 Function outputs for prototypical lighting effects...

Everything you need to get started with Advanced Digitrax Command Control. Evolution Express is perfect for most home and club layouts. It offers excellent speed control, prototypical consisting, the full range of programming features and much more. Maximum capacity, maximum features.  Take it to the...

Everything you need to get started with Advanced Digitrax Command Control. Evolution Express is perfect for most home and club layouts. It offers excellent speed control, prototypical consisting, the full range of programming features and much more. Maximum capacity, maximum features.  Take it to the...

Add a coiled cord to your LocoNet Throttle without soldering! Just plug the modular adapter provided on to your existing Throttle plug and add the coiled cord.  

It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2 watt protection resistor. LT1 Features: Use as a diagnostic tester Test decoders prior to installation Test Track power...

The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90, UR91 UR92 and others  Universal AC input 95-240V 50/60Hz  US 2 prong plug, in sideways orientation  to fit nicely on a plug strip...

Pluggable Terminal Blocks Replacement for lost or damaged Pluggable Terminal Blocks For use with products using Pluggable Terminal Blocks Includes: (1) 2 pin 3.5 mm Pluggable Terminal Block (1) 3 pin 3.5 mm Pluggable Terminal Block (1) 4 pin 3.5 mm Pluggable Terminal Block...

Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets. Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables any length that...

2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin sound harness with 8 Ohm...

2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax Easy Connect 8 Pin Harness Motor 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 8 Ohm 10...

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin sound harness with 8 Ohm...

Features: Designed to fit the Kato N scale SD40-2locos made from year 2006 onward Specifications Current Rating-Motor 1 Amp Continuous/1.25 Amp Peak Rating Size 0.426” x 3.11” w/LEDs x 0.195” (10.8204mm x 78.994mm w/LEDs x 4.953mm)

Digitrax Digitrax SE74 Signal Decoder Fully connectorized installation. Optional support for DCC 9-Aspect control mode, including Lunars. Easy setup with Option Switches and LocoNet programming. Configurable for four solenoid or four slow-motion turnout control. 8 Input lines for local control and sensors. 8 System...

HO scale Mainline Signaling Kit including: 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic HO scale signal. Mounting board and hardware...

N scale Turnout Signaling Kit including:  1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a...

Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout. Simply run the wires from...

  Plug and Play Universal fascia panel supporting LocoNet. Two RJ12 front panel Throttle jacks. Three RJ12 rear pass-through LocoNet jacks Supports throttle charging. Fully connectorized installation. 2mm rear plug for e.g. PS14 DC power supply. 4-pin rear plug option to share DC power....

Works with compatible LocoNet Systems Compact size for easy one-handed operation Color 1.5” LCD Display Screen Full numeric keys for easy locomotive selection Fine speed control with encoder knob Forward/Reverse toggle switch with braking On/Off Switch, uses AA or BP600MH batteries 2 or 4...

Works with compatible LocoNet Systems Compact size for easy one-handed operation Color 1.5” LCD Display Screen Full numeric keys for easy locomotive selection Fine speed control with encoder knob Forward/Reverse toggle switch with braking On/Off Switch, uses AA or BP600MH batteries 2 or 4...